RFID Card Access Control Board , Four Door Single Way Controller ,
Come With Iron Power Box
1. There are over-current protection, over-voltage protection,
reversal protection for the power supply and all the input and
output terminal. .Multiple hardware protection measure. Integration
with Other Security Systems
2. C3-400 can be integrated with other security systems such as
CCTV, fire alarm, BAS(building automation system) and other systems
to configure total security system.
3. Supports different Wiegand reader
4. The controller support different wiegand format, and can Connect
to different reader, including ID card reader, MIFARE card reader
and HID reader etc.
5. Input/ Output Ports to Control Doors
6. connect with variety of sensors, alarms, exit buttons, electric
lock and other devices.
7. Variety of Communication Function
8. Using either serial or TCP/IP communication, it provides
reliable network system
9. B/S structure software
10. It is easy to manage the system by browser from client PC.
11. Normal open after first punch card can be setup
12. Real-time Monitoring of Door status
13. Using the management software, it allows real-time monitoring
and control of door opening and closing of the whole system.
14. Simple Access Control System Configuration
15. Interlock function
16. Link different doors with special logic that one door is Open,
others should be closed.
17. Multi-card operation
18. This function is used to manage visitors or to manage some
special high secure place. The doors are opened when appointed
number registered cards are read together.
2. Duress Mode
21. SDK available
22. The system integrator can use the SDK to integrate the hardware
into their existing access control software system or to develop
32bit MIPS CPU
Power / Current
DC 9.6V-14.4V, Rated Max.1A
4ea (26bit Wiegand, 8bit Burst for PIN)
38,400bps (Recommended) / 9600bps, 19,200bps, 57,600bps
12ea (Exit Button#1, Exit Button#2, Button#3, Button#4, Door
Sensor#1, Door Sensor#2, Door Sensor#3, Door Sensor#4, Aux#1,
Aux#2, Aux#3, Aux#4)
4ea (4 FORM-C Relay Output, SPDT 5A@36VDC/8A@30VAC)
4ea (4 Aux FORM-C Relay Output, SPDT 2A@30VDC)
Yes, LED indication for communication, power, status and punch card
10% to 80% relative humidity non-condensing
218(W)*106(H)(single board )
345(W)*275(H)*70(D)(with power supply and metal box)
CE, FCC, RoHS